Surfbent "Storm"

Driving in fair weather isn't enough? When the storm front approaches, nothing will stop you on land - get the dark Storm version.

THE PROTECTOR

2-PIN SYTEMS PREPARED
Prepared for mounting with 1-pin AND 2-pin mast feet.

DECK PROTECTION PAD
Deck protection pad (silicone rubber) protects the sensitive deck surface between WBP and surfboard. Included in the standard set.

340 GRAMS
An optimized, geometric design and simulation of the design structure saved material, reduced weight and at the same time achieved the required strength and function.

COMPATIBLE WITH MAST FEET UP TO D=122 MM
Common mast feet up to 122 mm diameter can be mounted by the generously extended dimensioned surface of the protector.

CENTRAL WEIGHT DISTRIBUTION
The mass of the protector is close to the center of gravity of the board compared to other solutions and therefore has little impact on balance and performance.

COOL, DISCREET DESIGN
An eye-catcher thanks to harmoniously chosen shape combined with a fancy color choice provides your board that certain something.

MOUNTING ON ALL COMMON BOARDS
At the mast foot, the friction disc is replaced by the protector and mounted as usual.

FREESTYLE FIT
Freestyle maneuvers are not affected by geometricaly induced interference contours

UNRESTRICTED TRIMM
Setting range of the mast track remains intact.

ASSISTANCE WITH WATERSTART
The water start is facilitated by the shape of the protector and the resulting lift-up effect (lifting the sail towards the start position).

SIMPLIFIED HANDLING
The handling in the water is hardly affected by the flowing shape.